- -15%
- -15%
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Votive candle-making set
Contains:
One Aluminium tube mould length 33cm, Internal dimensions: 2 x 2 cm
Support base from resin
Silicone plug
Needle to thread the wick
Suitable wick 3X4 sold by the meter
Wax type: hard paraffin
Method of use
Thread the wick to the needle and punch a hole through the plug at the centre pull the wick through the plug and through the tube-mould. Insert the plug and attach the loose end of the wick to a support (for example to a tooth-pick). Take care that the wick is tight.
Melt the paraffin wax by heating at 85 degrees C and add colour and fragrance. With a hair drier heat the tube so that it is warm to the touch. Fill the tube with wax at 85C leaving some 20% for topping up later. Allow to harden, then fill the gap with the remaining wax and wait a further few minutes for it to cool to room temperature. Release the wick, remove the plug and then by gently tapping the tube on a hard surface and pulling the wick the candle will be released.
This product can also be used for melting paraffin or soy.
There are no available reviews. Write your review.
There are no available questions. Ask your question.
You are only allowed to leave 1 review(s) for this product
@COMMENT_COMMENT@
@COMMENT_COMMENT@
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@