Ceramic Casting Gypsum for fragrancing

Ceramic plaster suitable for the manufacture of plaster aromatic objects.

Due to its special granulometry, it can reproduce every detail in your design, giving a surface quality that touches perfection.
It does not contain harmful impurities (iron, hard particles).
Thanks to its porous surface, it can be sprayed with aromatic solution, giving quite good duration and performance.

Color: Gray

Workability time: +20 minutes

Must be mixed with water to form a liquid paste. Suggested ratio is 3:1 (and in some cases depending on the mold 2:1).

Instructions for use: Put the water in a container and gradually add the ceramic plaster, stirring well, until a homogeneous mixture is created that is not too thick (if necessary, add a little more water).

Pour the mixture into our mold and let it dry and remove it from the mold.

Tip: To calculate the amount of each material needed, fill the mold with water, weigh the water, and multiply the weight by 2.

It is not recommended to use varnish or exterior paint with acrylic colors, to avoid clogging of the products' pores and limitting the absorbency of the fragrance.

You can use powder colors or pigment colors to paint the mass of the mixture before casting, always in small quantities.

Store in a dry place.